PRODUCTS
Introducing our products
Dirty Devil bike cleaning products offer a range of superior cleaning products to put an end to those tough cleaning and scrubbing jobs.
Our effective quick-acting cleaner is formulated to be safely applied to all finished surfaces, brakes, drivetrains, plastics and rubber.
Dirty Devil cleaner gets your bike spotlessly clean and is extremely mild on even the most delicate components.
Dirty Devil bike cleaning products contain no harmful acids, CFC’s or solvents.
It is non-toxic and fully bio-degradable and will not damage or tarnish anodised or aluminium parts.
BIKE CLEANER
BIKE CLEANER
Dirty Devil Cleaner gets your bike spotlessly clean and is extremely mild on even the most delicate components. It contains no harmful acids, CFC’s or solvents. It is non-toxic and fully bio-degradable and will not damage or tarnish anodised or aluminium parts.
- Designed to leave your bike gleaming; Our cleaner immediately starts to break down the dirt and grime deposits using its quick-acting formula.
- Safe for the environment; Our cleaner contains no harmful acids, CFC’s or solvents so it’s non-toxic and fully bio-degradable.
- Gentle on your bike or machine; Due to its nox-toxic formula it can be used on anodised or aluminium parts and even on your brakes.
- Bike cleaner is available in the following sizes:
- 1 Litre Trigger Spray
- 5, 10 or 25 Litre Drums
How to use
Step 1 – Rinse your bike thoroughly to remove excess mud before applying Dirty Devil Bike Cleaner liberally to dirty surfaces.
Step 2 – Spray Dirty Devil Bike Cleaner onto the entire bike including components and leave it to get to work for 3-5 minutes – just enough time for a cuppa’ (Do not let it dry or apply in direct sunlight).
Step 3 – Stubborn dried-on dirt may need to be persuaded with a soft bristled brush or sponge then rinsed off with cold water.
Step 4 – Rinse the entire bike thoroughly with fresh, clean water.
PROTECT + SHINE
PROTECT + SHINE
Dirty Devil’s Protect + Shine is a specially formulated silicone spray which provides you with the ultimate bike frame protection. Protect + Shine will leave your plastic and metal parts with a high-gloss finish and will also leave behind a protective layer.
- After washing with Dirty Devil Cleaner, dry it off as normal then spray on the DIrty Devil Protect + Shine and walk away. Come back an hour later and be dazzled by the brilliance.
- This silicone based product can be also used on all suspension, making moving parts silky smooth.
- It contains no harmful chemicals to damage precious parts, such as aluminium, anodising, carbon fibre, fork seals or any other rubber / plastic-based components.
- Protect + Shine is available in the following sizes:
- 1 Litre Trigger Spray
- 5 Litre Drums
How to use
Step 1 – After cleaning your bike with Dirty Devil Bike Cleaner, ensure that all traces of oil-based silicones are removed before applying Protect + Shine.
Step 2 – Whilst the bike is still wet, spray After-Shine directly to the bike surface (avoid seat, brakes, handlebar grips, windshields & road tyres).
Step 3 – Once the bike has been covered, leave to air dry for 30 minutes (wipe away any excess with a dry cloth).
Step 4 – Once dried, your bike will have a high-gloss, protective finish!
BIKE CLEANER
5, 10 + 25 Litre Drum
BIKE CLEANER
1 Litre Trigger Spray
PROTECT + SHINE
1 Litre Trigger Spray
PROTECT + SHINE
5 Litre Drum
What our customers think...
Dirty Devil value the thoughts and reviews of our customers and here are a selection of our most recent customer comments
Want to know more?
If you would like to contact Dirty Devil regarding our cleaning products or for any distributor enquiries, please see below.
Email us
Follow us
#dirtydevil
Go get dirty!
(And of course - clean your bike with dirty devil afterwards!)